Hitachi JPEG2000 Manuel d'utilisateur télécharger pdf (Page 12)

JPEG2000 Stand alone DVR User Guide

- 12 -

2-2-3 Relay output installation

 Alarm output can be NO or NC, depending on the settings.

 NO-COM: the NO and COM terminals are open-circuit, and it’ll become closed-circuit when alarm triggered.

 NC-COM: the NC and COM terminals are closed-circuit, and it’ll become open-circuit when alarm triggered.

2-3 Network and serial port installation

2-3-1 Network setup

 Connect the network cable to “Ethernet”on back panel.

 Ethernet Setup between ADSL and Cable is different. For details, please refer to Ch. 7-2 Network installation.

2-3-2 Serial port setup

 User is able to connect the COM port of PC or other device to the DVR through RS232.

 RS232 settings (baudrate/ parity/ length/ stop bit ) are NOT adjustable.

The transmission baudrate is 19200bps, length 8 bits, stop bit 1, and the parity is none.

 ASCII-CODE is 1 BYTE.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 79 80

Pas de commentaire

Hitachi JPEG2000 Manuel d'utilisateur Page 12